]]>

Water and Sewer Contracting Company Talks about Storm Drainage Systems, Water Pipelines and Subsurface Utility Engineering.

October 2011 Archives

Kana Pipeline, Inc.

October 08, 2011 | Comments: 0

Sewer Construction

Sewer construction refers to the various procedures involved with installing sewer pipelines. Since sewers transport contaminated waste, the design and installation of pipes must abide by EPA guidelines.

Sewer construction can be associated with most new types of construction projects. Systems and installation procedures will vary depending on whether projects are residential, commercial, or municipal.

Water and Sewer Pipeline on "Sewer Construction"

Kana Pipeline, Inc.

October 07, 2011 | Comments: 0

Storm Water Drainage System

Planning and developing a storm water drainage system is an elaborate process that involves many people and agencies. These systems are required to drain water runoff from streets and surface areas like parking lots and sidewalks.

Storm water drainage system plans are developed by design engineers. Plans and materials have to meet standard provisions established at state and federal agencies. System plans for new construction undergo a review process by the City Planner. Once approval is obtained pipeline contractors can begin construction work.

Water and Sewer Pipeline on "Storm Water Drainage System"

Kana Pipeline, Inc.

October 04, 2011 | Comments: 0

Pipeline Construction Contractors

Pipeline construction contractors are responsible for installing, repairing, and replacing pipelines used to convey water, fuel, and petroleum-based products. Contractors are also charged with maintaining utility pipelines used to protect fiber optic cables and phone lines, along with sewer pipes and storm water drainage systems.

Pipeline construction contractors
handle most facets of the construction process including trenching, pipe installation, backfilling, paving, and land restoration. Contractors are also in charge of managing the process of applying protective coatings to pipes in order to prevent corrosion.

Water and Sewer Pipeline on "Pipeline Construction Contractors"

Kana Pipeline, Inc.

October 03, 2011

Subsurface Utility Engineering SUE

Subsurface utility engineering SUE refers to a practice that utilizes different types of tools to identify the location and condition of subsurface pipelines. Acquiring accurate data is essential for helping pipeline companies minimize jobsite dangers and work delays.

The process of subsurface utility engineering SUE was developed in early 90s and was primarily used by the Federal Highway Administration. Today, it is an industry standard utilized for nearly all types of pipeline construction including water pipes, sewer systems, and storm water drainage systems.

Water and Sewer Pipeline on "Subsurface Utility Engineering SUE"

Kana Pipeline, Inc.

October 02, 2011 | Comments: 0

Pipeline Contractors

Pipeline contractors utilize a variety of techniques to install subsurface pipeline systems. The type of pipes used depends upon the construction project. Gas and oil pipelines are entirely different than sewer and water pipelines, although installation processes are sometimes similar.

Pipeline contractors oversee the installation of new pipelines from start to finish. Once a design is provided, subsurface utility engineering is used to locate existing utilities and pipelines. Afterward, the land is prepared by removing rocks, boulders, shrubbery, trees, and other types of landscaping or building materials.

Water and Sewer Pipeline on "Pipeline Contractors "