Fireline contractors play an important part when it comes to public safety. This type of pipeline construction involves installing water pipes that connect to fire hydrants and indoor sprinkler systems. It also pertains to carefully inspecting pipes to ensure they are in good working order and free from defects that could reduce water pressure or cause accidental flooding.

Due to the nature of the work, fireline contractors require a significant amount of training before they become licensed. Most states require laborers to work as an apprentice under the tutelage of a licensed contractor.

Wet utility contractors are involved with many jobs related to subsurface pipeline. In addition to installing new sewer and water pipes and storm drainage systems, contractors also repair or remove pipes; prepare worksites for demolition work; and restore jobsites once pipeline work is completed.

Wet utility contractors also are involved with installation and repair of municipal water treatment systems, steel tanks, and pre-cast pump houses along with updating deteriorating freshwater pipelines.

There are different types of water pipe material that enable drinking water, fire prevention water and landscape-only water to be available as needed throughout our communities. Pipe that carries potable water, fireline water and recycled water is basically composed of two material types: metal or plastic. These water pipe types must operate under various water pressure conditions to ensure water flows to the appropriate designations.

The type of water pipe materials depends on the nature of the construction project and is usually determined by the designing civil engineer according to specifications required for the city or county where water pipe is to be installed. Water pipeline is commonly installed underground. Depending on the corrosivity of soil conditions, plastic pipe may be more suitable over metal pipe. Then again, metal pipe may also be installed using a protective plastic cover

Pipeline construction companies have large responsibilities to developers, general contractors, engineers, public utility agencies and to the general public. In pipeline construction, to construct is to install. From fresh running potable water to draining storm water drainage systems, modern-day society as we now know it simply would not be the same without critical pipeline work to make it all happen. Like trucking is to logistics, pipelines are critical to our industrialized living. This is where pipeline construction companies come into play.

A quality wet utility pipeline construction company, for example, installs wet utility pipeline systems so that they function correctly, as planned, meeting the needs of growing industrialized societies. Civil Engineers draw sewer, water and storm drainage pipeline routing plans that pipeline construction companies must follow to ensure properly working systems. These systems designed by Civil Engineers often involve multiple mathematical computations to ensure pipeline designs work and meet the specific needs of any given community, whether residential, commercial, industrial or institutional.

Sewer construction refers to the various procedures involved with installing sewer pipelines. Since sewers transport contaminated waste, the design and installation of pipes must abide by EPA guidelines.

Sewer construction can be associated with most new types of construction projects. Systems and installation procedures will vary depending on whether projects are residential, commercial, or municipal.

Planning and developing a storm water drainage system is an elaborate process that involves many people and agencies. These systems are required to drain water runoff from streets and surface areas like parking lots and sidewalks.

Storm water drainage system plans are developed by design engineers. Plans and materials have to meet standard provisions established at state and federal agencies. System plans for new construction undergo a review process by the City Planner. Once approval is obtained pipeline contractors can begin construction work.

Pipeline construction contractors are responsible for installing, repairing, and replacing pipelines used to convey water, fuel, and petroleum-based products. Contractors are also charged with maintaining utility pipelines used to protect fiber optic cables and phone lines, along with sewer pipes and storm water drainage systems.

Pipeline construction contractors handle most facets of the construction process including trenching, pipe installation, backfilling, paving, and land restoration. Contractors are also in charge of managing the process of applying protective coatings to pipes in order to prevent corrosion.

Subsurface utility engineering SUE refers to a practice that utilizes different types of tools to identify the location and condition of subsurface pipelines. Acquiring accurate data is essential for helping pipeline companies minimize jobsite dangers and work delays.

The process of subsurface utility engineering SUE was developed in early 90s and was primarily used by the Federal Highway Administration. Today, it is an industry standard utilized for nearly all types of pipeline construction including water pipes, sewer systems, and storm water drainage systems.

Pipeline contractors utilize a variety of techniques to install subsurface pipeline systems. The type of pipes used depends upon the construction project. Gas and oil pipelines are entirely different than sewer and water pipelines, although installation processes are sometimes similar.

Pipeline contractors oversee the installation of new pipelines from start to finish. Once a design is provided, subsurface utility engineering is used to locate existing utilities and pipelines. Afterward, the land is prepared by removing rocks, boulders, shrubbery, trees, and other types of landscaping or building materials.

Pipeline construction is an integral process that involves pre-construction planning, the actual construction phase, and post-construction. Each phase requires a dedicated team of highly trained employees including engineers, construction workers, general contractors, and project managers.

The planning phase of pipeline construction involves working with engineers to design the system. Multiple decisions must be made to ensure the project will not have negative impacts on the environment or community. The pipeline project planning team will need to acquire permits, secure easement rights, meet local, state, and federal requirements, and obtain project proposals from various pipeline construction companies.